Use Maintenance Oil Diamond Active for the ultimate care and maintenance of your oiled wood floor. This exclusive, low-odour, extremely tough maintenance oil is made from the absolute highest quality raw materials, to benefit both you and your oiled floor. In addition to being very easy to use and assuring minimal product waste, the maintenance oil refreshes the natural, warm glow of the wood and increases resistance to stains, via a unique hyper cross linking technology. Maintenance Oil Diamond Active is suitable for both manual and machine application to oiled floors.
Product, room and floor temperature should be 59-86°F. Make sure that the room is well-ventilated for optimal evaporation and drying time. Wash the floor with WOCA Intensive Wood Cleaner and leave the floor to dry for at least 8 hours before application of the maintenance oil.
Shake the container well.
Apply approx. 3 fl. oz. of Maintenance Oil Diamond Active per 45 sq. ft. floor using a pad, short-bristled paint roller (1/4") or a buffing machine with a white pad on slightly larger areas.
Make sure that the oil is polished well into the wood. Continue polishing until the wood seems saturated and the surface has an even, uniform appearance.
Remove excess oil with clean, lint-free cotton cloths, before proceeding to the next section. The surface should not appear wet and no excess oil should remain on the surface.
Continue, following the aforementioned method, until the whole floor has been treated.
Clean tools using turpentine.
If the floor is polished with a buffing machine, it can be used with caution after 4 hours of drying time at 68°F. If polished manually, the floor can be used with caution after approximately 24 hours. Do not expose the floor to water or clean it for the first 3 days, while the oil is hardening.
For regular cleaning, use WOCA Natural Soap or WOCA Oil Refreshing Soap. For re-oiling, we recommend WOCA Diamond Oil Active.