Superior Finish is a high-quality water-based, air-hardening, single-component floor finish. It is easy to use because it does not need to be mixed with a hardener, and its thickness and fill quality results in a surface with extra scratch-resistance and durability. Superior Finish is indoor climate labelled and thus assures a good working environment during application, as well as a comfortable indoor climate afterwards. The finish is particularly suitable for areas with high traffic, such as kitchens, corridors, entrance halls and office areas.
It is important that both wood and finish are at a temperature of at least 15 °C, and ideally about 20 °C, and that air humidity is approx. 50 %. Make sure that the room is well-ventilated, for optimal evaporation and drying time. Always remember to test on a less visible spot to check the compatibility of the wood with the finish.
Untreated or sanded surfaces:
For the final sanding on clean wood, use grain 120 sandpaper or sanding pad. Vacuum clean and wash the surface using a well-wrung microfibre mop. The floor must be completely dry before priming. WOCA Base Primer and a layer of Superior Finish should be applied undiluted, using a brush or roller. Intermediate sanding with grain 150-200 and vacuum clean the surface thoroughly. Then apply another layer of undiluted Superior Finish.
Refinishing finished surfaces:
Thoroughly clean the surface with WOCA Intensive Wood Cleaner. Then sand the surface until matt, using fine sand paper or a grain 120 sanding pad, and carefully vacuum clean the surface before finishing with Superior Finish. Apply two layers of undiluted finish, using a brush or roller.
The freshly-finished floor is suitable for cautious use after approx. 5 hours. Do not place furniture etc. on the floor until at least 24 hours after the final coat of finish. The floor will be ready for normal use after approx. 7 days, after which rugs etc. can be placed on the floor.
NB: Water and coloured fluids, such as red wine and coffee, must be wiped off immediately to prevent staining.
|Solid content||Approx. 30 %|
|Density||Approx. 1.05 g/ml|
|Fully hard||7 days. Leave for 7 days before washing or covering with rugs etc.|
|Viscosity||Approximately 20-25 sec. per DIN Cup 4 at 20 °C|
Lacquer roller, 11 mm pile, item no. 88003
Vinyl and lacquer care kit, item no. 699974
Wool pad, item no. 596051
Blue pad holder, article no. 399710
|Disposal||Empty containers and residues to be disposed of according to local regulations.|
|Shelf life||3 years|
|Storage||+ 50-77° F. Keep out of reach of children. Must not be exposed to heat (e.g. sunlight). Store frost-free.|