Pre-Color is a water-based stain for unfinished and sanded interior wood surfaces, such as floors, stairs, furniture and panels. The stain colors the wood and enhances the natural wood grain.
Product, room and floor temperature must be between 59-77°F. Wood moisture content must not exceed 12%. Ensure good ventilation during application and when drying. The wood must be newly sanded, use grit 100-120 for the final sanding. Vacuum thoroughly. Clean the wood with WOCA Intensive Wood Cleaner and leave it to dry for at least 8 hours before applying the stain.
Thoroughly shake the container of PreColor, both before and during use. Containers with different batch numbers should be mixed to avoid color mismatch.
Apply an even coat of undiluted stain along the wood grain with WOCA Applicator. Use at least 1 L of Pre-Color per 100 sq.ft. On vertical wood, apply from top to bottom. Leave the surface to dry for 8-12 hours.
Sand with a green pad to obtain a smooth surface and vacuum thoroughly.
The surface must be finished using one of WOCA’s oils, following the product instructions.
| Product properties | |
| Solids content | |
| PH value | |
| Form | |
| Appearance | |
| Flash point | |
| Density | |
| Gloss | |
| Gross weight | |
| Fully hard | |
| Viscosity | |
| Mixing ratio | |
| Coverage | |
| Colours | White, Grey, Black and Brown |
| Odour | |
| Binder | Water, pigments. |
| Humidity | |
| Dilution | |
| Can be sanded after | |
| Re-treatment_dry | |
| Drying time | 8-12 hours. |
| Application tools |
Applicator 9”, #880151 Telescopic rod, #599651 |
| Pot life | |
| Safety | |
| Disposal | Dispose of contents/container to an approved waste disposal plant. |
| Shelf life | 3 years |
| Packaging | |
| Colli | |
| MAL code | |
| Product no. | |
| Storage | +50-77°F. Keep out of reach of children. Do not expose to heat (e.g. sunlight). Store frost-free during winter and cool during summer (max. +77°F). |
