No1 Invisible Primer is a water based product suitable for priming of untreated or newly sanded wood surfaces indoor. It is designed for use before application of No1 Invisible Oil.
The surface to be primed should be freshly sanded with grit 100-120 and cleaned with No1 Intensive Cleaner. The surface must be completely dry before priming. Recommended wood moisture max. 12% and relative humidity 40-60%. Product, room and floor temperature should be between 15°C-30°C (60-85 F). Ensure good ventilation at all times during the application and drying time.
Shake the container well before and during use. Containers with different batch numbers should be mixed before use to avoid colour differences.
Apply the primer in a thin, even layer with the WOCA Applicator or a paint roller/paint tray. Work in small areas of 20 m2 (200 sq.ft.) or less. Leave the primer to be absorbed for max 5 minutes.
Polish the area with polishing machine and beige/red polishing pad until the primer has been polished fully into the wood (change pad when needed to avoid build up of primer in the pad). Remove any excess primer from the wood surface with cotton cloth or rag attached to the polishing machine pad.
Leave to dry for 3-4 hours.
De-nib the surface with bordeaux/maroon SPP/lacquer sanding pad when dry. Vacuum the surface.
Finish the surface with a coat of No1 Invisible Oil (see product label for detailed work instructions).
|Pot life: hhuer u weru weuiry weuyru wewyeu r|
|Cleaning of tools:|
|Disposal||Empty containers and residues to be disposed of according to local regulations.|
|Available pot sizes:|
|Storage||Store safely, out of reach of children. Do not expose to heat (e.g. sunlight). Store frost-free.|