Maintenance Paste is for the re-freshening and maintenance of oiled wood floors. The Maintenance Paste is also especially suitable for UV-oiled floors.
Before a new floor is taken into use it is recommended to buff it – both industrially oiled floors and on site oiled floors. The final buffing gives a hard-wearing surface and may take place either by hand or with machine.
Oiled floors should be maintained regularly – normally once a year, but more often when it comes to floors exposed to extremely hard wear. The maintenance may be done only partially.
Clean the floor with Wood Cleaner. Mix 125 ml Wood Cleaner into 5 litre lukewarm water. After cleaning, leave floor to dry for 8 hours. The floor must be completely dry.
Apply thin coat of Maintenance Paste onto 1-2 m2 floor at the time with white polishing pad or cotton cloth. Use floor machine for distribution of Maintenance Paste for large areas.
Make sure that the Maintenance Paste is polished uniformly into the wood. Buffing continues until wood appears saturated and silk-mat. Apply more paste if necessary. If a very mat finish is required, make buffing with cotton cloths under polishing pad.
Let surface rest for 4 hours.
Do not expose floor to water for 48 hours after finishing.
Clean tools with Solvent.
|Declaration:||Vegetable oil components, isoparaffin, pigments (white). Contains (white): Cobalt bis (2-ethylhexanoate).|
|Colours:||Natural and white.|
|Application tools:||Polishing machine for the application with machine and doodlebug for manual application. Cotton cloths.|
|Cleaning of tools:||With Solvent|
|Disposal||Empty containers and residues to be disposed of according to local regulations.|
|Packaging:||400 ml tube.|
|Storage||Store safely, out of reach of children. Do not expose to heat (e.g. sunlight). Store frost-free.|