Maintenance Gel is for the care and maintenance of oiled indoor wood surfaces and floors. The oil is quick-drying and leaves an attractive, water and dirt-repellent surface. Maintenance Gel is suitable for furniture, kitchen work surfaces, floors and other indoor wooden surfaces. It can also be used for improved results on factory-oiled/UV-oiled surfaces.
Thoroughly clean the surface with WOCA Intensive Wood Cleaner.
Sand the surface with grit 180 and vacuum clean the surface thoroughly.
Apply an appropriate amount of gel to a red/white WOCA Hand Scrubber and distribute over the surface in a thin, even coat. Continue polishing until the wood seems saturated. It is recommended to work on small areas at a time, as the gel is quick-drying. For larger areas, it would be advantageous to use a polishing machine.
Remove excess gel with dry, lint-free cotton cloths or pads until the surface no longer appears wet.
If the wood does not seem fully saturated after 4-6 hours, repolish with less gel than the first treatment, but follow the same procedure.
Wait 4-6 hours before using the surface. Avoid getting water or dirt on the wood surface for the next 2-3 days.
|Density||0.91 to 0.93 g/cm³.|
|Fully hard||2-3 days.|
|Can be sanded after|
Hand Scrubber Flex Kit, Red, #599750
Hand Scrubber Flex Kit, White, #599752
Polishing cloth, grey, #596057
|Disposal||Dispose of contents/container to an approved waste disposal plant.|
|Shelf life||3 years|
|Packaging||6.76 fl.oz. (200 ml)|
|Storage||+50-77°F. Keep out of reach of children. Do not expose to heat (e.g. sunlight). Store frost-free during winter and cool during summer (max. +77°F).|