Base Primer, Natural is a thick, water-based, quick-drying and sandable wood primer. The Base Primer seals the wood and minimises tannic acid penetration and side-bonding. It can be used for all untreated or sanded surfaces. Base Primer, Natural works as a powerful base layer before treatment with other water-based WOCA floor lacquers.
Untreated or sanded surfaces: Final sanding must be done with fine sandpaper (grit 120). Vacuum carefully and wipe surface with a cloth hard wrung in clean water. Apply Base Primer, Natural undiluted with brush or roller and allow the surface to dry. Apply a layer of topcoat with one of the WOCA floor lacquers and sand between coats using grit 150–200 sandpaper. Vacuum carefully and apply another 1-2 topcoats.
Relacquering already lacquered surfaces: Base Primer, Natural is only suitable for the priming of untreated or sanded surfaces.
|Declaration:||1,2-benzisothiazol-3(2H)-one, 2-methyl-2H-isothiazol-3-one, 5-Chloro-2-methyl-2,3-dihydroisothiazol-3-one and 2-Methyl-2,3-dihydroisothiazol-3-one (3:1). May produce an allergic reaction.|
|Density:||Approx. 1,0–1,05 gr/ml.|
|Viscosity:||Ready mixed. Approx. 35 seconds in DIN CUP 4 mm at 20°C|
|Colours:||Natural and white|
|Drying time:||Sandable after approx. 120 min. at 20°C and 30-60% RH.|
|Application tools:||Brush, Floor Coater, 11 mm Microfibre Paint Roller|
|Pot life: hhuer u weru weuiry weuyru wewyeu r|
|Cleaning of tools:||With water|
|Disposal||Dispose of this material and its container to local disposal facility for chemical waste.|
|Available pot sizes:||5 litre and 10 litre|
|Storage||Store out of reach of children. Do not expose to heat (e.g. sunlight). Store frost-free.|