Excellent Finish is a water-based, low-odour, quick-drying floor finish with good fill characteristics that produces a scratch-resistant and durable surface. The finish is indoor climate labelled and thus assures a good working environment during application, as well as a comfortable indoor climate afterwards. Excellent Finish is suitable for use in housing associations and private homes etc. due to its good sanding characteristics and fast drying time.
It is important that both wood and finish are at a temperature of at least 59°F, and ideally about 68°F, and that air humidity is approx. 50 %. Make sure that the room is well-ventilated, for optimal evaporation and drying time. Always remember to test on a less visible spot to check the compatibility of the wood with the finish.
Untreated or sanded surfaces:
For the final sanding on clean wood, use grit 120 sandpaper or sanding pad. Vacuum clean and wash the surface using a well-wrung microfibre mop. The floor must be completely dry before priming. WOCA Base Primer and a layer of Excellent Finish should be applied undiluted, using a brush or roller. Intermediate sanding with grit 150-200 and vacuum clean the surface thoroughly. Then apply another layer of undiluted Excellent Finish.
Refinishing finished surfaces:
Thoroughly clean the surface with WOCA Intensive Wood Cleaner. Then sand the surface until matt, using fine sand paper or a grit 120 sanding pad, and carefully vacuum clean the surface before finishing with Excellent Finish. Apply two layers of undiluted finish, using a brush or roller.
The freshly-finished floor is suitable for cautious use after approx. 5 hours. Do not place furniture etc. on the floor until at least 24 hours after the final coat of finish. The floor will be ready for normal use after approx. 7 days, after which rugs etc. can be placed on the floor.
NB: Water and coloured fluids, such as red wine and coffee, must be wiped off immediately to prevent staining.
|Solid content||Approx 30 %|
|Density||Approx. 1.05 g/ml|
|Fully hard||7 days. Leave for 7 days before washing or covering with rugs etc.|
|Viscosity||Approx. 20 -25 sec. per DIN Cup 4 at 68°F|
|Binder||Water-based, urethane-reinforced acrylic|
Lacquer roller, 11 mm pile, item no. 88003
Vinyl and lacquer care kit, item no. 699974
Wool pad, item no. 596051
Blue pad holder, article no. 399710
|Disposal||Empty containers and residues to be disposed of according to local regulations.|
|Shelf life||3 years|
|Storage||+ 50-77°F. Keep out of reach of children. Must not be exposed to heat (e.g. sunlight). Store frost-free.|