Base Primer, natural is a thick, water-based, quick-drying and sandable wood primer. The Base Primer seals the wood and minimises tannic acid penetration and side-bonding. It can be used for all untreated or sanded surfaces. Base Primer, natural works as a powerful base layer before treatment with other water-based WOCA floor finishes.
Untreated or sanded surfaces: Final sanding must be done with fine sandpaper (grit 120). Vacuum carefully and wipe surface with a cloth hard wrung in clean water. Apply Base Primer, natural undiluted with brush or roller and allow the surface to dry. Apply a layer of topcoat with one of the WOCA floor finishes and sand between coats using grit 150–200 sandpaper. Vacuum carefully and apply another 1-2 topcoats.
Refinishing already finished surfaces: Base Primer, natural is only suitable for the priming of untreated or sanded surfaces.
|Solid content||Approx. 35 %|
|Density||Approx. 1.05 g/ml|
|Viscosity||Ready mixed. Approx. 30 seconds in DIN CUP 4 mm at 20°C|
|Colours||Natural and nordic white|
Lacquer Application Roller, 11 mm luv, article no. 88003
Wool Pad, article no. 596051
Blue pad holder, article no. 399710
|Disposal||Dispose of this material and its container to local disposal facility for chemical waste.|
|Shelf life||3 years|
|Storage||+ 50-77°F. Keep out of reach of children. Must not be exposed to heat (e.g. sunlight). Store frost-free.|