Advanced 2K Lacquer is a high quality, water-based, 2-component floor lacquer that is extra-resistant to black heel marks, scratches and stains. The lacquer is indoor climate labelled and thus assures a good working environment during application, as well as a comfortable indoor climate afterwards. Advanced 2K Lacquer is particularly suitable for high-traffic areas, such as public areas, stairs and canteens.
It is important that both wood and lacquer have a temperature of min. 15 °C (preferably around 20 °C) and air humidity of approx. 50 %. Make sure that the room is well-ventilated for optimal evaporation and drying time. Always remember to test on a less visible spot to check the compatibility of the wood with the lacquer. The floor must be free of dirt, grease, wax and sanding residue. Floors that have been previously lacquered must be cleaned with WOCA Intensive Wood Cleaner before being sanded matt. Vacuum thoroughly and wipe the floor down afterwards if necessary, using a tightly-wrung water-soaked cloth.
Untreated or sanded surfaces:
For the final sanding to bare wood, use grain 120 sandpaper or sanding pad. Vacuum thoroughly and wipe the floor down afterwards if necessary, using a tightly-wrung water-soaked cloth. The floor must be completely dry before WOCA Base Primer or lacquer is applied.
1. Apply undiluted WOCA Base Primer using light strokes along the length of the wood. See the label of the product for further information.
2. Apply a coat of undiluted Advanced 2K Lacquer without hardener with a paint roller or brush and leave the floor to dry until the next day.
3. Sand the surface with grain 150-200 and vacuum clean the surface thoroughly.
4. Mix WOCA 2K Hardener with the lacquer and shake thoroughly before use. Leave the mixture to stand for ten minutes before use.
5. Apply the final coat of undiluted Advanced 2K Lacquer.
Relacquering lacquered surfaces:
Thoroughly clean the surface with WOCA Intensive Wood Cleaner. Then sand the surface with a grain 120-150 pad, vacuuming thoroughly before lacquering with Advanced 2K Lacquer. Mix WOCA 2K Hardener into the lacquer and shake thoroughly before use. Leave the mixture to stand for ten minutes before use. Apply two coats of undiluted lacquer, using a roller. Allow a drying time of 2-4 hours between the coats.
The freshly-lacquered floor is suitable for cautious use after approx. 6 hours. Do not place furniture etc. on the floor until at least 24 hours after the final coat of lacquer. The floor will be ready for normal use after approx. 5 days, after which rugs etc. can be placed on the floor.
NB: Water and coloured fluids, such as red wine and coffee, must be wiped off immediately to prevent staining.
|Solid content||Approx. 30 %|
|Fully hard||5 days. Wait 5 days before covering with carpets and washing.|
|Viscosity||Approx. 22 sec.|
|Mixing ratio||100 ml hardener to 5 L lacquer|
Lacquer Application Roller, 11 mm luv, article no. 88003
Vinyl and Lacquer Care Kit, article no. 699974
Wool Pad, article no. 596051
Blue pad holder, article no. 399710
|Pot life||The mixture must be used within 5 hours, as the hardener loses its effect afterwards.|
|Cleaning of tools:||With water|
|Disposal||Empty containers and residues to be disposed of according to local regulations.|
|Shelf life||3 years|
|Storage||+10-25 °C. Keep out of reach of children. Do not expose to heat (e.g. sunlight). Store frost-free.|