Advanced 2K Finish is a high quality, water-based, 2-component floor finish that is extra-resistant to black heel marks, scratches and stains. The finish is indoor climate labelled and thus assures a good working environment during application, as well as a comfortable indoor climate afterwards. Advanced 2K Finish is particularly suitable for high-traffic areas, such as public areas, stairs and canteens.
It is important that both wood and finish have a temperature of min. 59°F (preferably around 68°F) and air humidity of approx. 50 %. Make sure that the room is well-ventilated for optimal evaporation and drying time. Always remember to test on a less visible spot to check the compatibility of the wood with the finish.
Untreated or sanded surfaces:
For the final sanding to bare wood, use grit 120 sandpaper or sanding pad. Vacuum thoroughly and wipe the floor down afterwards if necessary, using a tightly-wrung water-soaked cloth. The floor must be completely dry before WOCA Base Primer or finish is applied.
1. Apply undiluted WOCA Base Primer using light strokes along the length of the wood. See the label of the product for further information.
2. Apply a coat of undiluted Advanced 2K Finish without hardener with a paint roller or brush and leave the floor to dry until the next day.
3. Sand the surface with grit 150-200 and vacuum clean the surface thoroughly.
4. Mix WOCA 2K Hardener with the finish and shake thoroughly before use. Leave the mixture to stand for ten minutes before use.
5. Apply the final coat of undiluted Advanced 2K Finish.
Refinishing finished surfaces:
Thoroughly clean the surface with WOCA Intensive Wood Cleaner. Then sand the surface with a grit 120-150 pad, vacuuming thoroughly before finishing with Advanced 2K Finish. Mix WOCA 2K Hardener into the finish and shake thoroughly before use. Leave the mixture to stand for ten minutes before use. Apply two coats of undiluted finish, using a roller. Allow a drying time of 2-4 hours between the coats.
The freshly-finished floor is suitable for cautious use after approx. 6 hours. Do not place furniture etc. on the floor until at least 24 hours after the final coat of finish. The floor will be ready for normal use after approx. 5 days, after which rugs etc. can be placed on the floor.
NB: Water and coloured fluids, such as red wine and coffee, must be wiped off immediately to prevent staining.
|Solid content||Approx. 30 %|
|Fully hard||5 days. Wait 5 days before covering with carpets and washing.|
|Viscosity||Approx. 22 sec.|
|Mixing ratio||100 ml hardener to 5 L finish|
Finish Application Roller, 11 mm luv, article no. 88003
Vinyl and Finish Care Kit, article no. 699974
Wool Pad, article no. 596051
Blue pad holder, article no. 399710
|Pot life||The mixture must be used within 5 hours, as the hardener loses its effect afterwards.|
|Disposal||Empty containers and residues to be disposed of according to local regulations.|
|Shelf life||3 years|
|Storage||+ 59-77°F. Keep out of reach of children. Must not be exposed to heat (e.g. sunlight). Store frost-free.|