Advanced 2K Lacquer is a 2-component, water-based floor lacquer with unique properties such as high resistance to chemicals, water and scratching. It is extremely hardwearing and offers superb adhesion to other types of lacquer.As Advanced 2K Lacquer is black heel mark resistant, it is particularly suitable for commercial high traffic areas such as schools, sports halls, airports, offices, canteens, dance floors, staircases, etc. It can also be used on oak wood.
Advanced 2K is a 2-component lacquer that is activated by adding the Advanced 2K Hardener into the Lacquer. Advanced 2K Hardener comes in plastic bottle of 100 ml canisters.
It is vital to mix the hardener and lacquer thoroughly by pouring the mixed hardener into the lacquer and then shake well (do not stir). The mixture should then be left to stand for 10 minutes to ensure that the hardener is activated before use.
Advanced 2K Hardener is a newly developed, highly effective hardener that contains no isocyanates, making it much safer for users and ecological for the environment. Advanced 2K Hardener produces an extra strong 2-component lacquer and remains active for up to 5 hours.
Previously finished wood must be cleaned with WOCA Wood Cleaner to remove dirt, grease, wax and soap residues. Sand the surface with sanding grit 120 (final sanding).
Apply Floor-Primer and leave to dry. Sand the surface lightly with sanding grit 120. Remove all traces of sanding dust with a vacuum cleaner. Untreated or newly sanded floors also have to be vacuumed thoroughly before lacquering. The surface must be dry before the next stage of treatment.
Apply the Advanced 2K Lacquer undiluted with a roller or brush. Allow to dry for approx. 6 hours. Sand lightly with sanding grit 120 to ensure adhesion. Remove all traces of sanding dust with a vacuum cleaner. Apply another coat of Advanced 2K Lacquer.
NB: The waiting time between coats depends on the ambient temperature and air humidity. It is important for both the wood and lacquer to be at a temperature of at least 59°F and preferably 68°F, air humidity of approx. 55%. The room also needs to be well ventilated, but there should not be a draught.
The finished floor can be walked on with care after approx. 5 hours and light objects put back in the room after 24 hours. The freshly sealed floor will be ready for full use after about 5 days (laying rugs, etc.).
|Density:||Approx. 1,0-1,05 gr/ml|
|Gloss:||Gloss 20/mat & gloss 40/silky-mat|
|Viscosity:||Approx. 25-35 seconds in DIN Cup 4mm at 25°C (77˚F).|
|Colours:||Matt and silk-matt|
|Binder:||Specially modified polyurethane|
|Sandable after:||After approx. 6 hours.|
|Drying time:||Can be walked on after approx. 5 hours at 68°F and 50% relative air humidity.|
|Application tools:||Sanding grit, sanding pad, brush or lacquer roller (hair length 12 mm), lacquer stirrer and lacquer bowl.|
|Pot life: hhuer u weru weuiry weuyru wewyeu r|
|Cleaning of tools:||With water|
|Available pot sizes:||5 L|
|Storage||Store safely, out of reach of children. Do not expose to heat (e.g. sunlight). Store frost-free.|